In our innovative method, we use two specialized tanks - one for immersion and the other for collecting rinse water - to remove paint quickly and effectively.
The process begins by immersing the parts in the AGEPON P-672 product for approximately one hour. During this time, the paints are efficiently removed. After soaking, the parts are rinsed with an ordinary jet of water, which is enough to complete the cleaning.
The result is remarkable: parts such as tubs, guards, ink cartridges and hoses are left extremely clean and smooth, free of the opaque haze usually left by the use of conventional solvents.
AGEPON P 672 is a dehydrated product with alkaline salts, surfactants, decanter, corrosion inhibitors and evaporation. It cleans parts impregnated with solvent, UV and water-based paints. It is suitable for cleaning by immersion, agitation, spray in tanks, or in our Remox 1600 WR and Remox 2000 WR high-pressure washers. It provides efficient cleaning, eliminating paint residue from previous cleanings and reducing preparation time due to the system’s robustness. Large quantities of parts can be washed in one go (e.g. 10 1.50m bathtubs at a time).
BENEFITS
Reduced cleaning time, better setup.
Evaporation inhibitor (less water consumption).
Environmentally friendly, long bath life and easy to dispose of.
Total cleaning efficiency and does not contaminate paints with residues from previous jobs.
Replaces solvents and caustic soda.
Reduced toxicity in the working environment.
Economy: concentrated product to be diluted in water with low replacement and reduced consumption.
As it leaves no ink residue, it prevents particles from accumulating in the racle, increasing the useful life of the blades and cylinders and promoting greater durability/productivity and print quality.
USE
By spray…………5% to 10%
By immersion……..7% to 15%
NOTE: pour directly into the tank and stir or pre-dissolve AGEPON P-672 in a small amount of water before adding to the tank. Use the normal safety equipment for handling alkaline chemicals.
NORMAL OPERATING CONDITIONS
Temperature …………………………. 65 to 85°C.
Spray removal time …………….. 15 to 30 minutes.
Immersion time ……………………. 30 to 40 minutes.
MAINTAINING PRODUCT CONCENTRATION
Remover solutions should be analyzed periodically or whenever necessary in order to obtain uniform, high-quality results. Whenever necessary, send a sample to our laboratory for analysis or, if you prefer, we can provide a titration analysis method.
SPRAY/DIP STEEL PARTS CLEANER
AGEPON P-672 B is a dehydrated product with alkaline salts, surfactants and corrosion inhibitors. It cleans parts impregnated with solvent-based, UV and water-based paints. It is suitable for cleaning by immersion, agitation, spray in tanks or in our Remox 1600 WR and Remox 2000 WR high-pressure washers. It provides efficient cleaning, eliminating paint residue from previous cleanings and reducing the preparation time of parts due to the system’s robustness. Large quantities of parts can be washed in one go (e.g. 10 bathtubs 1.50m at a time).
BENEFITS
Environmentally friendly, long bath life and easy to dispose of.
Total cleaning efficiency, does not contaminate paints with residues from previous jobs.
Substitute for solvents and caustic soda.
Reduced toxicity in the working environment.
Economy: concentrated product to be diluted in water with low replacement and reduced consumption.
As it leaves no ink residue, it prevents particles from accumulating on the racle increasing the useful life of the blades and cylinders, promoting greater durability/productivity and print quality.
Reduced cleaning time, better setup.
USE
By spray ……..5% to 10%
By immersion….7% to 15%
NOTE: pre-dissolve AGEPON P-672 B in a small amount of water before adding to the tank or pour into the tank and stir. Use the normal safety equipment indicated for handling alkaline chemicals.
NORMAL OPERATING CONDITIONS
Temperature ……………. 65 to 85°C.
Immersion time ……. 15 to 40 minutes.
MAINTAINING PRODUCT CONCENTRATION
Remover solutions should be analyzed periodically or whenever necessary in order to obtain uniform, high-quality results. Whenever necessary, send a sample to our laboratory for analysis or, if you prefer, we can provide a titration analysis method.
The AGEPROX RT 688 product revolutionizes the cleaning of aluminium parts, such as DOCTOR BLADE and RACKES, through an efficient immersion method. This process guarantees comprehensive and deep cleaning, completely removing any residue, including from holes and pipes. In addition to its effectiveness, AGEPROX RT 688 stands out for its long service life and non-flammable properties.
By adopting this method, we have eliminated the need for solvents in the parts cleaning sector and dispensed with the use of cleaning cloths. The result is remarkable: stainless steel and aluminum parts are impeccably clean, with a fresh look and no traces of paint. This contributes significantly to improving configurations and solving problems such as faults, scratches and contamination caused by residual impurities on printer parts, a common challenge when using electrical cleaning solvents.
FOR MORE INFORMATION,
CONSULT THE TECHNICAL SERVICE
The information contained in these instructions is based on our best knowledge at the time and is provided in good faith. However, it can only be understood as a general guide for each user to determine the viability and conditions of use of this product in their installations.
